Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 2 (1997)

Alan MacLean

Alan MacLean, Kingston, Ontario

“Large holes can be bored on a lathe without having to use a time-consuming face plate mounting. A 1 1/2-in. long piece of pipe, faced square, and with an inside diameter slightly larger than the outside diameter of the desired hole is accurately positioned on the plate. Attach to the plate with 3 1/2-in. long welds positioned 120 degrees apart. Put the pipe in a 3-jaw universal chuck and bore the hole. Use a disc grinder to carefully remove the tach welds.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.