Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 2 (1997)

Mel Selin

Mel Selin, Camrose, Alberta

“I had trouble with the steering on a 1979 DX 110 Deutz tractor. I bought a new steering pump for $1,300 but it still wouldn’t work so I talked to the dealer. He said the control unit under the dash was worn out and that a new one would be $2,800. I purchased a used one for $750 and installed it. The tractor still wouldn’t steer. The dealer said the used unit must have been faulty. I asked if there were any filters to clean out besides the hydraulic filters. He said no but when I started tracing the hydraulic lines I found a plugged filter in the suction line to the steering pump. It was so full of metal filings from the old steering pump that no oil could get through. I cleaned it out, reinstalled it, and the tractor steered perfectly. When I told the dealer about it he didn’t even know the filter was there. I spent a lot of money for nothing.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.