Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 6 (1996)

Tim Beirnes

Individual tip 2 of 2 from this reader’s published contribution.
Tim Beirnes, Cambridge, Ontario

“We broke a knuckle on the baler’s pto shaft on a Saturday night. A new yoke would have cost about $100 and my dealer was closed for business on Sunday. I solved the problem by borrowing the pto shaft off an old manure spreader. I shortened the shaft to the right length. Then I cut off the machined part of the knuckle on the baler pto shaft and welded it to the heavier knuckle on the spreader shaft. Eight years and 30,000 bales a year later it still works beautifully.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.