“When using our Deere 535 auto-wrap round baler we had a problem getting enough twine wraps on the left side of the bale, especially when we had to bale dry straw. It would compress, allowing the twine to slide off the bale. We solved the problem by converting the baler’s automatic cut-off control to a manual twine knife control that lets us wrap twine around the bale as many times as we want. We bolted a chain link onto the end of the twine arm and tied a rope to the link that leads up to the tractor cab. We also turned the plate that engages the knife sideways so that the knife can’t cut twine until the operator pulls on the rope. It lets us reduce the number of wraps across the center of the bale and wrap extra twine on one end. It works great and also reduces the amount of twine normally needed by about one third.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.